Shane, put me as paid also!
Thanks
Serge
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Fret Blade Update http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=4398 |
Page 1 of 1 |
| Author: | Shane Neifer [ Fri Jan 06, 2006 5:21 am ] |
| Post subject: | |
I am starting a new thread cause the other one is taking up too much space for all the good building topics taht are coming up. I ordered the blades this morning with the following specs (slightly modified after some last minute soul searching!): 6" dia, 5/8 arbor, .0245 kerf (+/- .0005 means the kerf will be between .024 and .025) and 110 per inch. Again, total cost including shipping: Canada $42.50 USD USA $43.50 USD Aus $46.25 USD Delivery will be 6 to 8 weeks to me and once I have them they will be out the door! I have been printing up delivery labels as I receive payment for the blades. I will be sending them sandwiched in cardboard. Here is the list of OL'ers who have expressed interest, a *'P'* following your id means that I have your payment. I will update this thread as things go along. Rod True *'P'* Bobc *'P'* larkim *'P'* buddy lee *'P'* Tim McKnight *'P'* Tony Karol Tom Dowey *'P'* Robbie O'Brien Dave Rector arvey Mike V *'P'* RayL *'P'* MLAnderson *'P'* RoyO JJ Donahue *'P'* Shaman97 GaryG *'P'* Keith McKenzie *'P'* Don A *'P'* Brock Poling Tim Det Michael McBroom Paul B Daniel M *'P'* Steve S Anthony Z Jimmy Caldwell RCoates *'P'* Todd Rose *'P'* Joe V *'P'* Ken McKay *'P'* Klhoush *'P'* tl507362 *'P'* dunwell Gary Overly *'P'* Please ensure that I have things right and that I haven't missed anyone. If you are not on the list and want one let me know, I did order a few extra. For those that haven't paid yet my paypal address is: shane@highmountaintonewood.com Thanks everyone and I will get these in your hands as soon as I can! Also, I will get the sled designed and available. Shane |
|
| Author: | mikev [ Fri Jan 06, 2006 7:30 am ] |
| Post subject: | |
thanks Shane,,,, guick question about the blade stiffner/s. Ok, got it that 5" is the right size, but one or two... I run one 5" on table saw now, but thats a much stiffer blade.. Should I get another?? Thanks..mike |
|
| Author: | Shane Neifer [ Fri Jan 06, 2006 8:05 am ] |
| Post subject: | |
You need two Mike, one for each side. The stiffer you keep this very thin blade the more accurate it will be. Check out Lee Valley, they are about $18 USD. I tried a similiar blade on a saw that was poorly set up and and had runout, that added about .002 to the kerf which is enough to make things too loose for a good fret wire fit. Hopes this helps Shane |
|
| Author: | Laurent Brondel [ Fri Jan 06, 2006 8:09 am ] |
| Post subject: | |
What's the price of the blade finally? Is $18 for one or two stiffeners? |
|
| Author: | Shane Neifer [ Fri Jan 06, 2006 8:14 am ] |
| Post subject: | |
$18 is for a pair of stiffners, the blades delivered to the US are $43.50 Shane |
|
| Author: | Rod True [ Fri Jan 06, 2006 8:55 am ] |
| Post subject: | |
Laurent, I don't think Shane is selling the stiffeners, just the blade. |
|
| Author: | Serge Poirier [ Fri Jan 06, 2006 11:37 am ] |
| Post subject: | |
Hi Shane is it too late to be counted in ? Serge |
|
| Author: | Shane Neifer [ Fri Jan 06, 2006 12:10 pm ] |
| Post subject: | |
Nope, it's not too late, I ordered a few extra. The total with shipping is $42.50 USD for us canucks. Shane |
|
| Author: | Steve Saville [ Fri Jan 06, 2006 2:21 pm ] |
| Post subject: | |
I don't want to be the last one marked off. Please mark me paid. |
|
| Author: | Serge Poirier [ Fri Jan 06, 2006 3:31 pm ] |
| Post subject: | |
Shane, put me as paid also! Thanks
Serge |
|
| Author: | Shane Neifer [ Fri Jan 06, 2006 6:05 pm ] |
| Post subject: | |
Thanks to all who have paid! Shane |
|
| Author: | Michael McBroom [ Sat Jan 07, 2006 7:25 am ] |
| Post subject: | |
Hi Shane, Just sent a payment. Thanks! Best, Michael |
|
| Author: | TimDet [ Sat Jan 07, 2006 7:52 am ] |
| Post subject: | |
thanks Shane, just paypaled you Tim Detwiler |
|
| Author: | TonyKarol [ Sun Jan 08, 2006 1:14 am ] |
| Post subject: | |
Hi Shane - looks like 6 blades for me and the boys - I will have to cut you a cheque this week. |
|
| Author: | Anthony Z [ Wed Jan 11, 2006 9:19 am ] |
| Post subject: | |
Shane I sent paypal payment on Jan 10th -- please advise as to whether you received it or not as I haven't received notification from PayPal as yet. Thanks again for organizing the group purchase -- its much appreciated. |
|
| Author: | Shane Neifer [ Wed Jan 11, 2006 10:35 am ] |
| Post subject: | |
Sorry Anthony, nothing arrived on this end. I just checked all of the paypal transacations as well. Shane |
|
| Author: | TonyKarol [ Fri Jan 13, 2006 12:12 am ] |
| Post subject: | |
Shane - can we make it seven blades ???? |
|
| Author: | Shane Neifer [ Fri Jan 13, 2006 3:59 am ] |
| Post subject: | |
Sure can Tony. I still have a few not spoken for. But I am going to have start counting again soon or I won't get one! Shane |
|
| Author: | SStallings [ Fri Jan 13, 2006 5:10 am ] |
| Post subject: | |
Still have one available? |
|
| Author: | Shane Neifer [ Fri Jan 13, 2006 5:45 am ] |
| Post subject: | |
Yup, I think I still have a few unclaimed. Will be a few weeks before delivery though. Shane |
|
| Author: | SStallings [ Fri Jan 13, 2006 5:46 am ] |
| Post subject: | |
No problem. I'll send the payment right now. Thanks. |
|
| Author: | Shane Neifer [ Fri Jan 13, 2006 5:49 am ] |
| Post subject: | |
OK, I'll mark you down! Thanks Shane |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|